Buying Guide

What to Ask Before Hiring a Microcement Contractor in Los Angeles

Microcement has gotten popular enough in LA over the past few years that a lot of general contractors now list it as one of their services, sometimes alongside tile, hardwood, and everything else they offer. That's not necessarily a problem, but it's worth knowing that "we can do microcement" and "we install microcement regularly and know how it fails when it's done wrong" are two very different levels of experience. Here's what we'd tell a friend to ask before signing a contract, regardless of who they end up hiring.

Do They Supply and Install, or Sub It Out?

This is the first question we'd ask, honestly. A lot of microcement jobs go wrong at the handoff between the company that sources the material and the crew that actually applies it — if something cures wrong or the color doesn't match the sample, everyone involved has someone else to point to. Ask directly whether the company you're talking to sources the material themselves and installs it with their own crew, or whether they're a general contractor subcontracting the microcement portion out to someone else. Neither answer disqualifies a contractor automatically, but if it's subbed out, ask who's actually accountable if something's wrong with the finish six months from now — the GC or the sub.

What Sealer System Do They Use, and How Many Coats?

Microcement itself isn't waterproof — it's the sealer on top that does that job, and the details matter more than most people expect. Ask what specific sealer product they use, whether it changes depending on the room (a shower needs a different build than a bedroom accent wall, and an outdoor pool deck needs a UV-stable formula), and how many coats go on. A contractor who can answer this specifically, without hesitating, is one who's done this enough times to have a real system. A vague answer like "we just seal it at the end" is worth pushing on further.

What Does Their Prep Process Actually Involve?

Prep is where most of the labor in a microcement job actually goes, and it's also where corners get cut when a contractor is trying to move fast or lowball a quote. Ask what happens to the existing surface before microcement goes on — is it cleaned and mechanically keyed for adhesion, is a bonding primer applied, and is it suited to what's actually underneath, whether that's old tile, bare concrete, or drywall. Skipping or rushing this stage is the single biggest cause of delamination and premature failure. If a quote seems unusually cheap or fast compared to others you've gotten, prep time is often where that difference is coming from.

Can They Show You Real Completed Work, Ideally Local?

Renderings and stock photography don't tell you much. Ask to see photos of jobs they've actually completed, and ideally ones that are a couple of years old rather than fresh installs, since that tells you how the sealer and finish are holding up over time, not just on day one. If they can point to Los Angeles or Southern California projects specifically, that's a good sign too — our climate isn't extreme, but the swing between hot dry stretches and the marine layer affects how surfaces cure and age, and a contractor with local experience has already seen how that plays out.

What's the Warranty on the Finish?

Ask specifically what's covered, for how long, and what would void it. A vague verbal promise isn't the same as something in writing that spells out what happens if the sealer fails early or the surface delaminates. This is also a good moment to ask about the maintenance schedule they recommend — a sealer refresh every 2 to 3 years in high-traffic rooms is normal and doesn't void anything, but you want to know that going in rather than being surprised later.

How Do They Handle a No-Demo Install?

A lot of microcement's appeal is that it usually goes over an existing sound substrate without tearing it out first. Ask how the contractor evaluates whether your existing tile, concrete, or subfloor qualifies for that approach versus needing removal. A contractor who's done this a lot will have a clear checklist — cracking, lifting, moisture behind the surface — rather than a blanket answer either way. If every job they've quoted required full demo, that's worth asking about, since it's a much rarer requirement than it sounds.

Genuinely Useful Advice, Not Just a Pitch

We'll be straightforward: we're both the supplier and the installer, we use a specific sealer system depending on the room, and our prep process is the same one described above because we've seen what happens when it's skipped. So naturally, walking through this list tends to work in our favor. But we'd give the same advice to someone who ends up hiring a different company entirely, because these are the questions that actually separate a contractor who knows the material from one who's offering it because it's trending. A homeowner who asks these five questions up front avoids the vast majority of the problems we get called in to fix on someone else's job.

Want to know who you'd actually be working with? See our background, process, and how we approach every job.

Learn More About Us
Close-up texture of sand-tone microcement finish — project near Los Angeles in Marina del Rey

Ready to talk through your project?