Most of the maintenance questions we get come after the job is done and someone's standing in their new kitchen wondering what they're actually allowed to clean it with. The short version: microcement is low-maintenance, but not zero-maintenance, and the routine that keeps it looking new for years is pretty simple once you know it.
The Everyday Routine
For daily or weekly cleaning, a damp mop or soft cloth and a pH-neutral cleaner is all a sealed microcement surface needs. On floors, that's a standard microfiber mop with warm water and a small amount of neutral cleaner — nothing that foams aggressively or smells like it belongs in an industrial kitchen. On countertops, a soft cloth with the same kind of cleaner handles everyday spills, crumbs, and cooking residue without any fuss. Dry the surface after mopping if it's pooling water anywhere, mainly so you're not leaving water sitting on a floor for hours, not because a quick pass of water will hurt a properly sealed surface.
What to Avoid
Bleach and abrasive cleaners are the two things we tell every client to skip entirely. Bleach can degrade the sealer over repeated use, and once the sealer starts breaking down, the surface underneath loses its water and stain resistance. Abrasive powders, scouring pads, and stiff-bristle brushes will scratch the sealer's surface finish, which shows up as dull patches or fine scratch marks, especially noticeable on a honed or matte finish where light catches unevenly across a scratched area. Vinegar-based cleaners are another one to avoid regularly — the acidity can etch the sealer over time, similar to what it would do to natural stone. If you're ever unsure whether a product is safe, a plain pH-neutral cleaner is the safest default, and it's what we recommend clients keep under the sink.
Resealing on a Real Schedule
The sealer is a wear layer, not a permanent coating, and it thins out gradually with foot traffic, cleaning, and general use. In high-traffic rooms — a kitchen floor, an entryway, a busy bathroom — we recommend a fresh sealer coat every 2 to 3 years to keep the surface at full water and stain resistance. Lower-traffic spaces, like a guest bathroom or a formal living room that doesn't see daily use, can often go longer between resealing. This isn't a full re-installation — it's a maintenance coat applied over the existing microcement, and it's a fast job compared to the original install.
How to Tell When It's Time to Reseal
The clearest sign is water behavior. On a freshly sealed surface, water beads up and sits on top. As the sealer wears, water starts to soak in slightly instead of beading, and you'll notice it takes longer to wipe dry. Another sign is stains grabbing more than they used to — a coffee ring or an oil splatter that wipes off instantly on a fresh seal but leaves a faint mark on a worn one. If you're noticing either of these, it's worth scheduling a resealing before the surface gets more porous, rather than waiting until a stain actually sets in.
Handling Stains Early
On a properly sealed surface, most everyday spills — wine, coffee, olive oil, tomato sauce — wipe up clean if you get to them within a reasonable window. The key is not letting something sit for hours or overnight, especially anything acidic or oily, since prolonged contact is what gives a spill time to work into a spot where the sealer has started thinning. If a stain does set, don't reach for anything abrasive to scrub it out — that risks damaging the sealer further and making the spot worse. A stronger pH-neutral cleaner and a soft cloth handles most residual marks, and if something's stubborn, that's usually a sign the sealer in that specific spot needs attention rather than a sign the microcement itself is stained through.
Cleaning Textured Versus Smooth Finishes
A honed, smooth finish and a more hand-troweled, textured finish clean a little differently in practice. Smooth surfaces wipe clean in one pass since there's nowhere for residue to sit, but they also show water spots and streaking more readily, so a microfiber cloth used dry after mopping keeps them looking their best. Textured finishes hide streaking well but can hold onto fine debris — sand, crumbs, pet hair — in the low points of the trowel work, so they benefit from a quick dry sweep or vacuum before mopping rather than pushing debris around with a wet mop first.
A Few Habits That Make a Real Difference
Felt pads under furniture legs and barstools prevent the kind of fine scratching that adds up over years of dragging chairs across a kitchen floor. Trivets and cutting boards on countertops protect the sealer from direct knife contact and hot pan marks — microcement counters handle normal kitchen use well, but no sealer loves direct blade contact any more than stone or quartz does. And keeping sand and grit off floors near entryways, which matters more in a lot of Southern California homes given how much outdoor-indoor living happens through sliding doors, cuts down on the fine abrasive wear that grit tracks in over time.
Have more questions about day-to-day care? We've answered the ones we hear most often from clients.
Read the Full FAQ