We get this question on almost every bathroom consultation, and the honest answer is a little more specific than a yes or no. Microcement, on its own, is not waterproof. It's a cement-based material, which means it's porous in the same way raw concrete is porous — water can work its way in if nothing stops it. What actually makes a microcement surface waterproof is the sealer that goes on top, and understanding that distinction matters if you're deciding whether it's right for a shower, a bathroom floor, or a pool deck.
The Two-Part System: Microcement Plus Sealer
Every microcement installation we do has two functional layers. The base coats — usually two or three thin layers, hand-troweled — build the color, texture, and structure of the surface. Then a topcoat sealer goes on over the cured microcement, and that sealer is what closes the pores and stops water from penetrating. Skip the sealer, or apply it thin, and you end up with a surface that looks finished but absorbs moisture the way a sponge would, just slower.
We typically apply two coats of sealer, sometimes more in wet-heavy areas like a shower pan or a pool deck edge. The specific product varies depending on where the surface sits — a matte sealer for a bathroom floor reads differently underfoot than the higher-build sealer we'd use on a shower wall that's getting direct water spray daily.
Where This Actually Gets Tested: Showers and Wet Rooms
A shower is the toughest test for any waterproofing system, cement-based or otherwise, because it's not just occasional moisture — it's sustained water contact multiple times a day. Sealed microcement handles this well, and it has one real advantage over tile here: no grout. Grout is porous by nature and it's usually the first thing to fail in a tile shower, long before the tile itself does. A microcement shower is one continuous sealed surface from the pan up the walls, which removes that failure point entirely.
That said, a shower install needs a waterproofing membrane underneath the microcement in the pan area, the same way a tile shower would — the microcement and sealer aren't a substitute for that layer, they work with it. We always confirm the substrate and membrane situation during a shower consultation before quoting the job.
Outdoors: Pool Decks and Patios Take a Different Kind of Water Exposure
Outdoor microcement deals with a different problem than a shower — less constant saturation, but more UV exposure and, around a pool, near-constant splashing plus chlorine. We use a UV-stable sealer outdoors specifically because a sealer that isn't rated for direct sun will start to chalk and lose its water resistance faster than the microcement underneath it wears out. On pool decks we also add an anti-slip additive to the sealer, since wet, sealed surfaces without any texture get slick fast.
What Happens If the Sealer Wears Down
Sealer isn't a one-time application that lasts the life of the floor. In high-traffic areas — an entryway, a well-used bathroom floor, a pool deck that gets foot traffic all summer — the sealer gradually wears thin from foot traffic and cleaning. When that happens, the surface becomes more porous again, and you might notice water sitting on it longer instead of beading, or a stain that doesn't wipe off as easily as it used to. That's the sign it's time for a fresh sealer coat, typically every 2 to 3 years in high-use rooms, longer in low-traffic areas. It's a maintenance step, not a repair — a sealer refresh doesn't require redoing the microcement itself.
So, Is It Waterproof?
Sealed and maintained, yes — fully waterproof, and well-suited to bathrooms, showers, kitchens, and pool decks. Unsealed, no. The distinction isn't a technicality; it's the whole reason the installation process includes a dedicated sealing stage rather than treating it as optional finishing work. If a contractor is proposing microcement for a wet area without a clear answer on which sealer they're using and how many coats, that's worth asking about directly before you sign off on the job.
Planning a bathroom or shower install? See how we approach waterproofing on every project.
Explore Indoor Bathrooms