Comparisons

Microcement vs. Limewash: Choosing the Right Wall Finish

Limewash comes up a lot in the same conversations as microcement, usually because both give a wall that chalky, softly clouded look that flat paint just can't fake. They're not really competing for the same job, though, even when they get pulled into the same mood board. Once you know what each one is actually made of and what it can survive, picking between them comes down to one question: what's this wall going to have to deal with day to day?

What Limewash Actually Is

Limewash is a mineral-based finish, essentially slaked lime thinned into a paint-like consistency and brushed on in layers. It's breathable, which makes it a genuinely good choice for older plaster or masonry walls that need to let moisture pass through rather than trap it. It's also fast and inexpensive to apply compared to a troweled finish — a room can be limewashed in a day or two by someone experienced with it. The tradeoff is durability. Limewash isn't washable in any real sense; scrub it and you'll take the finish off with the dirt. It also can't handle direct water contact, so it's off the table for a shower, a backsplash, or anywhere that gets wiped down regularly.

What Microcement Actually Is

Microcement is a cement-based coating applied in thin hand-troweled layers, then sealed. It costs more than limewash and takes longer to install because of the multiple coats and cure time between them, but what you get for that investment is a genuinely washable, durable surface. Wipe it down, mop it, run water on it — sealed microcement handles all of it without losing its finish. It's the material we use when a wall (or a floor, or a shower) needs to actually perform, not just look good under the right light.

Where Limewash Wins

If the room is dry, low-contact, and the goal is a soft, aged, textured look on a budget, limewash is hard to beat. Bedrooms, dining rooms, hallways — anywhere nobody's touching or wiping the wall regularly — are good candidates. It's also worth considering on older Spanish-style or Craftsman homes around LA where breathability actually matters for the original plaster or masonry underneath, since sealing that kind of wall too tightly can trap moisture and cause problems down the line.

Where Microcement Wins

Anywhere water or heavy contact is part of daily life — a kitchen backsplash, a bathroom wall, a mudroom, a wall behind a bar or sink — microcement is the one built for it. It also holds up in high-traffic hallways and entryways where limewash would scuff and mark within a season. If the plan includes carrying the same finish from a wall onto an adjoining floor or countertop, microcement is really the only option between the two, since limewash was never engineered to leave the wall.

Cost and Timeline, Side by Side

Limewash is the cheaper, faster option almost every time — fewer coats, less prep, no sealing stage. Microcement takes longer because of the prep, the two to three coats, and the sealing, and it costs more per square foot as a result. That gap is the price of durability. If a wall only needs to look good, limewash gets there for less. If it needs to look good and hold up to daily use, the extra cost of microcement is what buys the difference.

What Happens as Each One Ages

Limewash actually improves with a bit of age in the right setting — it develops a soft, uneven patina as it weathers that a lot of homeowners like, and touch-ups blend in naturally since new coats sit over old the same chalky way. The flip side is that any water spot, grease splatter, or scuff stays there until the wall is redone; you can't spot-clean it back to new. Microcement ages differently. It holds its finish and sheen consistently over the years because the sealer is doing the protective work, but if it does get damaged, a patch repair needs to be done by someone who can match the trowel texture and color, which isn't a weekend DIY fix the way a limewash touch-up can be.

How to Actually Decide

Walk the room and ask what touches that wall. If the honest answer is "not much, just light," limewash is a smart, economical choice. If the answer includes water, cooking splatter, kids, pets, or regular cleaning, microcement is worth the extra cost. A lot of our clients end up mixing both in the same home — limewash in a quiet bedroom, microcement in the kitchen and bath — and that's usually the right call. We'll sometimes get asked to spec both finishes on the same project specifically so the budget goes where it's actually needed, rather than paying for durability on a wall that will never be touched, or skimping on a wall that needs to survive daily use.

Not sure which finish fits your space? See the wall applications we install most often.

See Wall Applications
Close-up texture of sand-tone microcement finish — project near Los Angeles in Marina del Rey

Ready to talk through your wall finish options?